/* =========================================================================== Doom 3 GPL Source Code Copyright (C) 1999-2011 id Software LLC, a ZeniMax Media company. This file is part of the Doom 3 GPL Source Code (?Doom 3 Source Code?). Doom 3 Source Code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. Doom 3 Source Code is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Doom 3 Source Code. If not, see . In addition, the Doom 3 Source Code is also subject to certain additional terms. You should have received a copy of these additional terms immediately following the terms and conditions of the GNU General Public License which accompanied the Doom 3 Source Code. If not, please request a copy in writing from id Software at the address below. If you have questions concerning this license or the applicable additional terms, you may contact in writing id Software LLC, c/o ZeniMax Media Inc., Suite 120, Rockville, Maryland 20850 USA. =========================================================================== */ /* =============================================================================== Trace model vs. polygonal model collision detection. =============================================================================== */ #include "CollisionModel.h" #define MIN_NODE_SIZE 64.0f #define MAX_NODE_POLYGONS 128 #define CM_MAX_POLYGON_EDGES 64 #define CIRCLE_APPROXIMATION_LENGTH 64.0f #define MAX_SUBMODELS 2048 #define TRACE_MODEL_HANDLE MAX_SUBMODELS #define VERTEX_HASH_BOXSIZE (1<<6) // must be power of 2 #define VERTEX_HASH_SIZE (VERTEX_HASH_BOXSIZE*VERTEX_HASH_BOXSIZE) #define EDGE_HASH_SIZE (1<<14) #define NODE_BLOCK_SIZE_SMALL 8 #define NODE_BLOCK_SIZE_LARGE 256 #define REFERENCE_BLOCK_SIZE_SMALL 8 #define REFERENCE_BLOCK_SIZE_LARGE 256 #define MAX_WINDING_LIST 128 // quite a few are generated at times #define INTEGRAL_EPSILON 0.01f #define VERTEX_EPSILON 0.1f #define CHOP_EPSILON 0.1f typedef struct cm_windingList_s { int numWindings; // number of windings idFixedWinding w[MAX_WINDING_LIST]; // windings idVec3 normal; // normal for all windings idBounds bounds; // bounds of all windings in list idVec3 origin; // origin for radius float radius; // radius relative to origin for all windings int contents; // winding surface contents int primitiveNum; // number of primitive the windings came from } cm_windingList_t; /* =============================================================================== Collision model =============================================================================== */ // flibit: 64 bit fix, changed long to int typedef struct cm_vertex_s { idVec3 p; // vertex point int checkcount; // for multi-check avoidance unsigned int side; // each bit tells at which side this vertex passes one of the trace model edges unsigned int sideSet; // each bit tells if sidedness for the trace model edge has been calculated yet } cm_vertex_t; typedef struct cm_edge_s { int checkcount; // for multi-check avoidance unsigned short internal; // a trace model can never collide with internal edges unsigned short numUsers; // number of polygons using this edge unsigned int side; // each bit tells at which side of this edge one of the trace model vertices passes unsigned int sideSet; // each bit tells if sidedness for the trace model vertex has been calculated yet int vertexNum[2]; // start and end point of edge idVec3 normal; // edge normal } cm_edge_t; // flibit end typedef struct cm_polygonBlock_s { int bytesRemaining; byte * next; } cm_polygonBlock_t; typedef struct cm_polygon_s { idBounds bounds; // polygon bounds int checkcount; // for multi-check avoidance int contents; // contents behind polygon const idMaterial * material; // material idPlane plane; // polygon plane int numEdges; // number of edges int edges[1]; // variable sized, indexes into cm_edge_t list } cm_polygon_t; typedef struct cm_polygonRef_s { cm_polygon_t * p; // pointer to polygon struct cm_polygonRef_s *next; // next polygon in chain } cm_polygonRef_t; typedef struct cm_polygonRefBlock_s { cm_polygonRef_t * nextRef; // next polygon reference in block struct cm_polygonRefBlock_s *next; // next block with polygon references } cm_polygonRefBlock_t; typedef struct cm_brushBlock_s { int bytesRemaining; byte * next; } cm_brushBlock_t; typedef struct cm_brush_s { int checkcount; // for multi-check avoidance idBounds bounds; // brush bounds int contents; // contents of brush const idMaterial * material; // material int primitiveNum; // number of brush primitive int numPlanes; // number of bounding planes idPlane planes[1]; // variable sized } cm_brush_t; typedef struct cm_brushRef_s { cm_brush_t * b; // pointer to brush struct cm_brushRef_s * next; // next brush in chain } cm_brushRef_t; typedef struct cm_brushRefBlock_s { cm_brushRef_t * nextRef; // next brush reference in block struct cm_brushRefBlock_s *next; // next block with brush references } cm_brushRefBlock_t; typedef struct cm_node_s { int planeType; // node axial plane type float planeDist; // node plane distance cm_polygonRef_t * polygons; // polygons in node cm_brushRef_t * brushes; // brushes in node struct cm_node_s * parent; // parent of this node struct cm_node_s * children[2]; // node children } cm_node_t; typedef struct cm_nodeBlock_s { cm_node_t * nextNode; // next node in block struct cm_nodeBlock_s *next; // next block with nodes } cm_nodeBlock_t; typedef struct cm_model_s { idStr name; // model name idBounds bounds; // model bounds int contents; // all contents of the model ored together bool isConvex; // set if model is convex // model geometry int maxVertices; // size of vertex array int numVertices; // number of vertices cm_vertex_t * vertices; // array with all vertices used by the model int maxEdges; // size of edge array int numEdges; // number of edges cm_edge_t * edges; // array with all edges used by the model cm_node_t * node; // first node of spatial subdivision // blocks with allocated memory cm_nodeBlock_t * nodeBlocks; // list with blocks of nodes cm_polygonRefBlock_t * polygonRefBlocks; // list with blocks of polygon references cm_brushRefBlock_t * brushRefBlocks; // list with blocks of brush references cm_polygonBlock_t * polygonBlock; // memory block with all polygons cm_brushBlock_t * brushBlock; // memory block with all brushes // statistics int numPolygons; int polygonMemory; int numBrushes; int brushMemory; int numNodes; int numBrushRefs; int numPolygonRefs; int numInternalEdges; int numSharpEdges; int numRemovedPolys; int numMergedPolys; int usedMemory; } cm_model_t; /* =============================================================================== Data used during collision detection calculations =============================================================================== */ typedef struct cm_trmVertex_s { int used; // true if this vertex is used for collision detection idVec3 p; // vertex position idVec3 endp; // end point of vertex after movement int polygonSide; // side of polygon this vertex is on (rotational collision) idPluecker pl; // pluecker coordinate for vertex movement idVec3 rotationOrigin; // rotation origin for this vertex idBounds rotationBounds; // rotation bounds for this vertex } cm_trmVertex_t; typedef struct cm_trmEdge_s { int used; // true when vertex is used for collision detection idVec3 start; // start of edge idVec3 end; // end of edge int vertexNum[2]; // indexes into cm_traceWork_t->vertices idPluecker pl; // pluecker coordinate for edge idVec3 cross; // (z,-y,x) of cross product between edge dir and movement dir idBounds rotationBounds; // rotation bounds for this edge idPluecker plzaxis; // pluecker coordinate for rotation about the z-axis unsigned short bitNum; // vertex bit number } cm_trmEdge_t; typedef struct cm_trmPolygon_s { int used; idPlane plane; // polygon plane int numEdges; // number of edges int edges[MAX_TRACEMODEL_POLYEDGES]; // index into cm_traceWork_t->edges idBounds rotationBounds; // rotation bounds for this polygon } cm_trmPolygon_t; typedef struct cm_traceWork_s { int numVerts; cm_trmVertex_t vertices[MAX_TRACEMODEL_VERTS]; // trm vertices int numEdges; cm_trmEdge_t edges[MAX_TRACEMODEL_EDGES+1]; // trm edges int numPolys; cm_trmPolygon_t polys[MAX_TRACEMODEL_POLYS]; // trm polygons cm_model_t *model; // model colliding with idVec3 start; // start of trace idVec3 end; // end of trace idVec3 dir; // trace direction idBounds bounds; // bounds of full trace idBounds size; // bounds of transformed trm relative to start idVec3 extents; // largest of abs(size[0]) and abs(size[1]) for BSP trace int contents; // ignore polygons that do not have any of these contents flags trace_t trace; // collision detection result bool rotation; // true if calculating rotational collision bool pointTrace; // true if only tracing a point bool positionTest; // true if not tracing but doing a position test bool isConvex; // true if the trace model is convex bool axisIntersectsTrm; // true if the rotation axis intersects the trace model bool getContacts; // true if retrieving contacts bool quickExit; // set to quickly stop the collision detection calculations idVec3 origin; // origin of rotation in model space idVec3 axis; // rotation axis in model space idMat3 matrix; // rotates axis of rotation to the z-axis float angle; // angle for rotational collision float maxTan; // max tangent of half the positive angle used instead of fraction float radius; // rotation radius of trm start idRotation modelVertexRotation; // inverse rotation for model vertices contactInfo_t *contacts; // array with contacts int maxContacts; // max size of contact array int numContacts; // number of contacts found idPlane heartPlane1; // polygons should be near anough the trace heart planes float maxDistFromHeartPlane1; idPlane heartPlane2; float maxDistFromHeartPlane2; idPluecker polygonEdgePlueckerCache[CM_MAX_POLYGON_EDGES]; idPluecker polygonVertexPlueckerCache[CM_MAX_POLYGON_EDGES]; idVec3 polygonRotationOriginCache[CM_MAX_POLYGON_EDGES]; } cm_traceWork_t; /* =============================================================================== Collision Map =============================================================================== */ typedef struct cm_procNode_s { idPlane plane; int children[2]; // negative numbers are (-1 - areaNumber), 0 = solid } cm_procNode_t; class idCollisionModelManagerLocal : public idCollisionModelManager { public: // load collision models from a map file void LoadMap( const idMapFile *mapFile ); // frees all the collision models void FreeMap( void ); // get clip handle for model cmHandle_t LoadModel( const char *modelName, const bool precache ); // sets up a trace model for collision with other trace models cmHandle_t SetupTrmModel( const idTraceModel &trm, const idMaterial *material ); // create trace model from a collision model, returns true if succesfull bool TrmFromModel( const char *modelName, idTraceModel &trm ); // name of the model const char * GetModelName( cmHandle_t model ) const; // bounds of the model bool GetModelBounds( cmHandle_t model, idBounds &bounds ) const; // all contents flags of brushes and polygons ored together bool GetModelContents( cmHandle_t model, int &contents ) const; // get the vertex of a model bool GetModelVertex( cmHandle_t model, int vertexNum, idVec3 &vertex ) const; // get the edge of a model bool GetModelEdge( cmHandle_t model, int edgeNum, idVec3 &start, idVec3 &end ) const; // get the polygon of a model bool GetModelPolygon( cmHandle_t model, int polygonNum, idFixedWinding &winding ) const; // translates a trm and reports the first collision if any void Translation( trace_t *results, const idVec3 &start, const idVec3 &end, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ); // rotates a trm and reports the first collision if any void Rotation( trace_t *results, const idVec3 &start, const idRotation &rotation, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ); // returns the contents the trm is stuck in or 0 if the trm is in free space int Contents( const idVec3 &start, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ); // stores all contact points of the trm with the model, returns the number of contacts int Contacts( contactInfo_t *contacts, const int maxContacts, const idVec3 &start, const idVec6 &dir, const float depth, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ); // test collision detection void DebugOutput( const idVec3 &origin ); // draw a model void DrawModel( cmHandle_t model, const idVec3 &origin, const idMat3 &axis, const idVec3 &viewOrigin, const float radius, const idVec4 &linecolor ); // print model information, use -1 handle for accumulated model info void ModelInfo( cmHandle_t model ); // list all loaded models void ListModels( void ); // write a collision model file for the map entity bool WriteCollisionModelForMapEntity( const idMapEntity *mapEnt, const char *filename, const bool testTraceModel = true ); private: // CollisionMap_translate.cpp int TranslateEdgeThroughEdge( idVec3 &cross, idPluecker &l1, idPluecker &l2, float *fraction ); void TranslateTrmEdgeThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmEdge_t *trmEdge ); void TranslateTrmVertexThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmVertex_t *v, int bitNum ); void TranslatePointThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmVertex_t *v ); void TranslateVertexThroughTrmPolygon( cm_traceWork_t *tw, cm_trmPolygon_t *trmpoly, cm_polygon_t *poly, cm_vertex_t *v, idVec3 &endp, idPluecker &pl ); bool TranslateTrmThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *p ); void SetupTranslationHeartPlanes( cm_traceWork_t *tw ); void SetupTrm( cm_traceWork_t *tw, const idTraceModel *trm ); private: // CollisionMap_rotate.cpp int CollisionBetweenEdgeBounds( cm_traceWork_t *tw, const idVec3 &va, const idVec3 &vb, const idVec3 &vc, const idVec3 &vd, float tanHalfAngle, idVec3 &collisionPoint, idVec3 &collisionNormal ); int RotateEdgeThroughEdge( cm_traceWork_t *tw, const idPluecker &pl1, const idVec3 &vc, const idVec3 &vd, const float minTan, float &tanHalfAngle ); int EdgeFurthestFromEdge( cm_traceWork_t *tw, const idPluecker &pl1, const idVec3 &vc, const idVec3 &vd, float &tanHalfAngle, float &dir ); void RotateTrmEdgeThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmEdge_t *trmEdge ); int RotatePointThroughPlane( const cm_traceWork_t *tw, const idVec3 &point, const idPlane &plane, const float angle, const float minTan, float &tanHalfAngle ); int PointFurthestFromPlane( const cm_traceWork_t *tw, const idVec3 &point, const idPlane &plane, const float angle, float &tanHalfAngle, float &dir ); int RotatePointThroughEpsilonPlane( const cm_traceWork_t *tw, const idVec3 &point, const idVec3 &endPoint, const idPlane &plane, const float angle, const idVec3 &origin, float &tanHalfAngle, idVec3 &collisionPoint, idVec3 &endDir ); void RotateTrmVertexThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmVertex_t *v, int vertexNum); void RotateVertexThroughTrmPolygon( cm_traceWork_t *tw, cm_trmPolygon_t *trmpoly, cm_polygon_t *poly, cm_vertex_t *v, idVec3 &rotationOrigin ); bool RotateTrmThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *p ); void BoundsForRotation( const idVec3 &origin, const idVec3 &axis, const idVec3 &start, const idVec3 &end, idBounds &bounds ); void Rotation180( trace_t *results, const idVec3 &rorg, const idVec3 &axis, const float startAngle, const float endAngle, const idVec3 &start, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &origin, const idMat3 &modelAxis ); private: // CollisionMap_contents.cpp bool TestTrmVertsInBrush( cm_traceWork_t *tw, cm_brush_t *b ); bool TestTrmInPolygon( cm_traceWork_t *tw, cm_polygon_t *p ); cm_node_t * PointNode( const idVec3 &p, cm_model_t *model ); int PointContents( const idVec3 p, cmHandle_t model ); int TransformedPointContents( const idVec3 &p, cmHandle_t model, const idVec3 &origin, const idMat3 &modelAxis ); int ContentsTrm( trace_t *results, const idVec3 &start, const idTraceModel *trm, const idMat3 &trmAxis, int contentMask, cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ); private: // CollisionMap_trace.cpp void TraceTrmThroughNode( cm_traceWork_t *tw, cm_node_t *node ); void TraceThroughAxialBSPTree_r( cm_traceWork_t *tw, cm_node_t *node, float p1f, float p2f, idVec3 &p1, idVec3 &p2); void TraceThroughModel( cm_traceWork_t *tw ); void RecurseProcBSP_r( trace_t *results, int parentNodeNum, int nodeNum, float p1f, float p2f, const idVec3 &p1, const idVec3 &p2 ); private: // CollisionMap_load.cpp void Clear( void ); void FreeTrmModelStructure( void ); // model deallocation void RemovePolygonReferences_r( cm_node_t *node, cm_polygon_t *p ); void RemoveBrushReferences_r( cm_node_t *node, cm_brush_t *b ); void FreeNode( cm_node_t *node ); void FreePolygonReference( cm_polygonRef_t *pref ); void FreeBrushReference( cm_brushRef_t *bref ); void FreePolygon( cm_model_t *model, cm_polygon_t *poly ); void FreeBrush( cm_model_t *model, cm_brush_t *brush ); void FreeTree_r( cm_model_t *model, cm_node_t *headNode, cm_node_t *node ); void FreeModel( cm_model_t *model ); // merging polygons void ReplacePolygons( cm_model_t *model, cm_node_t *node, cm_polygon_t *p1, cm_polygon_t *p2, cm_polygon_t *newp ); cm_polygon_t * TryMergePolygons( cm_model_t *model, cm_polygon_t *p1, cm_polygon_t *p2 ); bool MergePolygonWithTreePolygons( cm_model_t *model, cm_node_t *node, cm_polygon_t *polygon ); void MergeTreePolygons( cm_model_t *model, cm_node_t *node ); // finding internal edges bool PointInsidePolygon( cm_model_t *model, cm_polygon_t *p, idVec3 &v ); void FindInternalEdgesOnPolygon( cm_model_t *model, cm_polygon_t *p1, cm_polygon_t *p2 ); void FindInternalPolygonEdges( cm_model_t *model, cm_node_t *node, cm_polygon_t *polygon ); void FindInternalEdges( cm_model_t *model, cm_node_t *node ); void FindContainedEdges( cm_model_t *model, cm_polygon_t *p ); // loading of proc BSP tree void ParseProcNodes( idLexer *src ); void LoadProcBSP( const char *name ); // removal of contained polygons int R_ChoppedAwayByProcBSP( int nodeNum, idFixedWinding *w, const idVec3 &normal, const idVec3 &origin, const float radius ); int ChoppedAwayByProcBSP( const idFixedWinding &w, const idPlane &plane, int contents ); void ChopWindingListWithBrush( cm_windingList_t *list, cm_brush_t *b ); void R_ChopWindingListWithTreeBrushes( cm_windingList_t *list, cm_node_t *node ); idFixedWinding *WindingOutsideBrushes( idFixedWinding *w, const idPlane &plane, int contents, int patch, cm_node_t *headNode ); // creation of axial BSP tree cm_model_t * AllocModel( void ); cm_node_t * AllocNode( cm_model_t *model, int blockSize ); cm_polygonRef_t*AllocPolygonReference( cm_model_t *model, int blockSize ); cm_brushRef_t * AllocBrushReference( cm_model_t *model, int blockSize ); cm_polygon_t * AllocPolygon( cm_model_t *model, int numEdges ); cm_brush_t * AllocBrush( cm_model_t *model, int numPlanes ); void AddPolygonToNode( cm_model_t *model, cm_node_t *node, cm_polygon_t *p ); void AddBrushToNode( cm_model_t *model, cm_node_t *node, cm_brush_t *b ); void SetupTrmModelStructure( void ); void R_FilterPolygonIntoTree( cm_model_t *model, cm_node_t *node, cm_polygonRef_t *pref, cm_polygon_t *p ); void R_FilterBrushIntoTree( cm_model_t *model, cm_node_t *node, cm_brushRef_t *pref, cm_brush_t *b ); cm_node_t * R_CreateAxialBSPTree( cm_model_t *model, cm_node_t *node, const idBounds &bounds ); cm_node_t * CreateAxialBSPTree( cm_model_t *model, cm_node_t *node ); // creation of raw polygons void SetupHash(void); void ShutdownHash(void); void ClearHash( idBounds &bounds ); int HashVec(const idVec3 &vec); int GetVertex( cm_model_t *model, const idVec3 &v, int *vertexNum ); int GetEdge( cm_model_t *model, const idVec3 &v1, const idVec3 &v2, int *edgeNum, int v1num ); void CreatePolygon( cm_model_t *model, idFixedWinding *w, const idPlane &plane, const idMaterial *material, int primitiveNum ); void PolygonFromWinding( cm_model_t *model, idFixedWinding *w, const idPlane &plane, const idMaterial *material, int primitiveNum ); void CalculateEdgeNormals( cm_model_t *model, cm_node_t *node ); void CreatePatchPolygons( cm_model_t *model, idSurface_Patch &mesh, const idMaterial *material, int primitiveNum ); void ConvertPatch( cm_model_t *model, const idMapPatch *patch, int primitiveNum ); void ConvertBrushSides( cm_model_t *model, const idMapBrush *mapBrush, int primitiveNum ); void ConvertBrush( cm_model_t *model, const idMapBrush *mapBrush, int primitiveNum ); void PrintModelInfo( const cm_model_t *model ); void AccumulateModelInfo( cm_model_t *model ); void RemapEdges( cm_node_t *node, int *edgeRemap ); void OptimizeArrays( cm_model_t *model ); void FinishModel( cm_model_t *model ); void BuildModels( const idMapFile *mapFile ); cmHandle_t FindModel( const char *name ); cm_model_t * CollisionModelForMapEntity( const idMapEntity *mapEnt ); // brush/patch model from .map cm_model_t * LoadRenderModel( const char *fileName ); // ASE/LWO models bool TrmFromModel_r( idTraceModel &trm, cm_node_t *node ); bool TrmFromModel( const cm_model_t *model, idTraceModel &trm ); private: // CollisionMap_files.cpp // writing void WriteNodes( idFile *fp, cm_node_t *node ); int CountPolygonMemory( cm_node_t *node ) const; void WritePolygons( idFile *fp, cm_node_t *node ); int CountBrushMemory( cm_node_t *node ) const; void WriteBrushes( idFile *fp, cm_node_t *node ); void WriteCollisionModel( idFile *fp, cm_model_t *model ); void WriteCollisionModelsToFile( const char *filename, int firstModel, int lastModel, unsigned int mapFileCRC ); // loading cm_node_t * ParseNodes( idLexer *src, cm_model_t *model, cm_node_t *parent ); void ParseVertices( idLexer *src, cm_model_t *model ); void ParseEdges( idLexer *src, cm_model_t *model ); void ParsePolygons( idLexer *src, cm_model_t *model ); void ParseBrushes( idLexer *src, cm_model_t *model ); bool ParseCollisionModel( idLexer *src ); bool LoadCollisionModelFile( const char *name, unsigned int mapFileCRC ); private: // CollisionMap_debug int ContentsFromString( const char *string ) const; const char * StringFromContents( const int contents ) const; void DrawEdge( cm_model_t *model, int edgeNum, const idVec3 &origin, const idMat3 &axis, const idVec4 &linecolor ); void DrawPolygon( cm_model_t *model, cm_polygon_t *p, const idVec3 &origin, const idMat3 &axis, const idVec3 &viewOrigin, const idVec4 &linecolor ); void DrawNodePolygons( cm_model_t *model, cm_node_t *node, const idVec3 &origin, const idMat3 &axis, const idVec3 &viewOrigin, const float radius, const idVec4 &linecolor ); private: // collision map data idStr mapName; ID_TIME_T mapFileTime; int loaded; // for multi-check avoidance int checkCount; // models int maxModels; int numModels; cm_model_t ** models; // polygons and brush for trm model cm_polygonRef_t*trmPolygons[MAX_TRACEMODEL_POLYS]; cm_brushRef_t * trmBrushes[1]; const idMaterial *trmMaterial; // for data pruning int numProcNodes; cm_procNode_t * procNodes; // for retrieving contact points bool getContacts; contactInfo_t * contacts; int maxContacts; int numContacts; }; // for debugging extern idCVar cm_debugCollision;